Description
The HI93754C-25 COD kit contains 25 ready-to-use vials containing pre-measured reagents. These high quality reagents follow follow an adaptation of the dichromate method for COD determination. In this method, a heated digestion is required to oxidize organic matter in the HI93754C-25
EPA– The EPA approved method 410.4 for COD determination requires the use of mercuric sulfate (HgSO4). Mercuric sulfate is present in the EPA reagent vials to mitigate the interference of chloride in the measurement sample. This is a common requirement for wastewater treatment plants and food manufacturing facilities which tend to have higher concentrations of chloride present in their effluent.
It is important to treat used vials as hazardous waste, as mercury waste requires recycling.
Mercury-free – For those who do not wish to handle mercury reagents, our “green,in. mercury-free reagents are available for COD determination. These reagents are more sensitive to chloride interferences, as mercuric sulfate is not present. While the mercury-. Containing similar chemical reagents as the EPA method, it is important to treat used ISO vials as hazardous waste, as mercury waste requires recycling.
| Method | Parameter | Range (as O2) | Resolution | Accuracy | Reagent COD |
| EPA | COD LR COD MR |
0 to 150 mg/L 0 to 1500 mg/L |
1 mg/L 1 mg/L |
±5 mg/L ±5% of reading ±15 mg/L ±4% of reading |
HI93754A-25 HI93754B-25 |
| Dichromate | COD HR | 0 to 15000 mg/L | 10 mg/L | ±150 mg/L ±3% of reading | HI93754C-25 |
| Mercury-free | COD LR COD MR |
0 to 150 mg/L 0 to 1500 mg/L |
1 mg/L 1 mg/L |
±5 mg/L ±5% of reading ±15 mg/L ±4% of reading |
HI93754D-25 HI93754E-25 |
| ISO | COD LR COD M |
0 to 150 mg/L 0 to 1500 mg/L |
1 mg/L 1 mg/L |
±5 mg/L ±5% of reading ±15 mg/L ±4% of reading |
HI93754F-25 HI93754G-25 |
Reviews
There are no reviews yet.