Hanna HI7061L General Purpose pH Electrode Cleaning Solution (500 mL)

Description

Hanna HI7061L is a general purpose pH/ORP electrode cleaning solution manufactured by Hanna Instruments. It comes in a 500 mL bottle and is designed to remove mineral deposits, impurities, residues, and other contaminants that accumulate on pH and ORP electrodes during use or improper storage, ensuring accurate measurements and extending electrode life

The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage

• Clearly marked expiration date and lot number for traceability.
• Air-tight seal to ensure the quality of the solution