Wall & Building Moisture Meter

Wall & Building Moisture Meter Price in Bangladesh 2026

If you’re about to paint a wall, install wooden flooring, or start any interior finishing work in Bangladesh — checking the moisture level first is not optional. It’s essential.

Damp walls cause paint to bubble and peel within months. Wet concrete causes adhesive failures. And hidden water leaks behind finished walls are one of the most expensive problems any building owner can face. A good wall moisture meter takes less than a minute to flag all of this — before you’ve spent money on materials.

In Bangladesh, wall moisture meter prices range from around ৳4,500 for a basic pin-type meter like the R&D MT-19, all the way up to ৳75,000–৳95,000 for a professional-grade Bosch D-tect 150 SV UWB radar scanner. The Bosch GMS 120 and GMS 120-27 multi-detectors sit in the middle at ৳30,000–৳42,000.

The two main technologies available here are:

• Pin-type meters — two small pins contact the surface and read % moisture content (% MC) directly. Affordable, accurate for surface-level work.
• Pinless / Radar scanners — non-destructive detection through walls. Identifies metal, live wires, plastic pipes, and moisture pockets at depths up to 150mm without a single drill hole.

Whether you’re a site painter, civil engineer, furniture manufacturer, or MEP contractor, there’s a model here built for your exact workflow.

Wall Moisture Meter & Concrete Scanner List in BD 2026

Model Name	Sensor Type	Max Detection Depth	Price (BDT)	CTA
R&D MT-19	Pin-type (contact)	Surface (~20mm)	৳5,000	Buy
Bosch GMS 120	Multi-sensor (Metal / Wood / Live Wire)	120mm in concrete	৳35,000	Buy
Bosch GMS 120-27	Multi-sensor + Dual Power	120mm in concrete	৳30,000	Buy
Bosch D-tect 150 SV	UWB Radar Scanner	150mm in concrete	৳2,00,000	Buy

Note: Prices above are approximate and may vary with market conditions. Contact ASTZ directly for the latest confirmed wall moisture meter price in Bangladesh, corporate quotations, or bulk orders.

Types of Structural Dampness & Leak Detectors Available at ASTZ

Digital Pin-Type Moisture Meter for Plaster & Wood — R&D MT-19

The R&D MT-19 is the most widely used and value-for-money wall dampness tester in Bangladesh. It handles wood, plaster, drywall, and concrete — and gives a real-time % MC readout on a clear LCD.

Key highlights:

• Multiple material group presets for accurate cross-material readings.
• Compact, lightweight — fits in a tool belt or site bag.
• 9V battery powered, long operational life.
• Ideal for painters, QC inspectors, small contractors, and furniture factories.

Bangladesh price: Approx. ৳4,500 – ৳6,000.

Multi-Detector Wall Scanner for Metal, Wire, and Joist Tracking — Bosch GMS 120 / GMS 120-27

The Bosch GMS 120 is a professional-grade 3-in-1 wall scanner — detecting metal, live wiring, and wooden substructures in a single pass. The GMS 120-27 is the upgraded version with dual power supply (AA batteries or 3.7V Li-Ion), IP54 dust and splash protection, and an improved illuminated marking ring for faster, more accurate transfer of results.

Key highlights:

• Detection depth up to 120mm in cured concrete.
• Automatic self-calibration — ready to scan immediately after power on.
• Graphical LCD shows detection strength and object center.
• IP54 rating — built for real site conditions.

Bangladesh price: GMS 120 — ৳30,000–৳38,000 | GMS 120-27 — ৳35,000–৳42,000.

H3: Professional Ultra-Wideband (UWB) Concrete Radar Scanner — Bosch D-tect 150 SV

The Bosch D-tect 150 SV is the most capable tool in this category. It uses Ultra-Wideband radar technology developed for professional structural inspection — and it works where conventional scanners don’t.

Key highlights:

• Max detection depth: 150mm — the deepest in its class.
• Seven operating modes: Concrete, Wet Concrete, Deep Concrete, In-Floor Heating, Drywall, Metal, and Signal View.
• Detects ferrous/non-ferrous metals, live cables, wooden studs, and water-filled plastic pipes.
• Self-calibrating from switch-on — no manual setup required.
• Voice-guided menu in 7 languages for intuitive operation.
• Millimeter-accurate depth display, object width, and material type identification.

This is not just a concrete moisture meter — it’s a complete building leak detector and structural inspection tool in one device.

Bangladesh price: Approx. ৳75,000 – ৳95,000.

Wall Moisture Meter — Frequently Asked Questions

What Is the Starting Wall Moisture Meter Price in Bangladesh?

The most affordable wall moisture meter available in Bangladesh starts at approximately ৳5,000 for the R&D MT-19 pin-type model. This covers basic % moisture content measurement for walls, plaster, wood, and similar building materials. Professional radar scanners like the Bosch GMS 120 start from around ৳30,000.

Can I Use a Wood Moisture Meter to Check Concrete Building Walls?

Yes — but only if your device has a concrete or plaster material group setting. Using a wood-calibrated reading on concrete will give inaccurate results because the electrical properties of the two materials differ significantly.

The R&D MT-19 includes multiple material group presets, so you can switch between wood and concrete modes. Always select the correct mode before taking a reading.

What Is the Safe Moisture Percentage Level for Brick Walls Before Applying Paint?

As a general guide:

• Brick and cement plaster walls: Should read below 18–20% MC before standard wall paint is applied.
• For epoxy coatings or waterproof membranes: The substrate typically needs to be below 5–8% MC — check the specific product datasheet.
• For premium wallpaper or adhesive-backed materials: Follow manufacturer guidelines, but generally below 12% MC is recommended.

When in doubt, test more points across the wall surface. Moisture is rarely uniform — one dry area doesn’t mean the whole wall is ready.

How Deep Can a Bosch Professional Wall Scanner Detect Water Leaks?

Detection depth depends on the model and target material:

• Bosch GMS 120 / GMS 120-27: Up to 120mm in cured concrete. Detects metal, live wire, and wood — but not plastic pipes or moisture pockets directly.
• Bosch D-tect 150 SV: Up to 150mm for ferrous and non-ferrous metals; up to 60mm for water-filled plastic pipes. This model is specifically designed for wet and damp concrete conditions, making it the most capable building leak detector available in Bangladesh.

Do You Provide Official Warranty and Corporate Quotations (RFQ) for Bosch Products?

Yes. ASTZ provides official manufacturer warranty on all Bosch professional tools sold through our platform, including the GMS 120, GMS 120-27, and D-tect 150 SV. Corporate clients, government bodies, and engineering firms can request a formal RFQ (Request for Quotation) for bulk orders, project-specific supply, or tender documentation. Contact us directly for quotation turnaround.

Where to Buy Original R&D and Bosch Wall Moisture Meters in Dhaka?

You can purchase genuine R&D and Bosch wall scanners and moisture meters directly from ASTZ Bangladesh — both online and in person. All products come with official warranty, proper invoice documentation, and after-sales support. Delivery is available across Dhaka and to all major districts in Bangladesh.

All Model	Price
R&D MT-19 Wall moisture Meter	5,000 BDT
Bosch GMS 120 Multi-Detector	35,000 BDT
Bosch GMS 120-27 Multi-Detector	30,000 BDT
Bosch D-tect 150 SV Wall Scanner	2,00,000 BDT
UNI-T UT387C Stud Sensor Wall Detector	6,900 BDT