Description

Introduction Rigol DS1102Z-E oscilloscope

The Rigol DS1102Z-E oscilloscope brings together a 100 MHz bandwidth, 1 GSa/s real-time sample rate, and RIGOL’s proprietary UltraVision technology in a compact, affordable package that competes with instruments priced far higher. Engineers who work on embedded systems, power electronics, audio circuits, and communications hardware all find the DS1102Z-E capable enough for daily professional use. Furthermore, university students and electronics educators benefit from its intuitive interface, deep measurement library, and large 7-inch color display that makes waveform analysis fast and clear.

The oscilloscope operates on the DS1000Z-E platform, which RIGOL designed to balance rich features against a streamlined user experience. The unit provides two fully independent analog input channels, each switchable between 1 MΩ and 50 Ω input impedance. Additionally, the standard memory depth reaches 24 Mpts in single-channel mode and 12 Mpts in dual-channel mode, allowing the DS1102Z-E to sustain a high sample rate over a much longer time window than comparable instruments.

RIGOL built the waveform capture rate up to 30,000 waveforms per second, which dramatically improves the scope’s ability to catch rare, intermittent, and glitch-type signals that appear infrequently. As a result, engineers spend less time waiting for a fault to repeat and more time analyzing its cause. The hardware waveform recording system stores up to 60,000 consecutive frames, and users play them back frame by frame to trace how a signal evolved over time. Rigol DS1102Z-E oscilloscope,

The built-in serial decode system handles RS232/UART, I²C, and SPI protocols without requiring any optional add-on purchase. Therefore, embedded developers decode bus traffic directly on the oscilloscope screen and cross-reference it against the analog waveform in real time. Astz BD imports this oscilloscope directly and makes it available across Bangladesh at a competitive price with fast courier delivery. Rigol DS1102Z-E oscilloscope,

 

Specifications Rigol DS1000Z-E series scope

Acquisition
Analog Channels	2 (CH1, CH2) + External Trigger input
Bandwidth	100 MHz
Sample Rate (Real-time)	Up to 1 GSa/s
Memory Depth	24 Mpts (1 channel) / 12 Mpts (2 channels)
Waveform Capture Rate	Up to 30,000 wfms/s
ADC Resolution	8 bits
Waveform Recording	Up to 60,000 frames (hardware, real-time)
Vertical
Vertical Scale	1 mV/div – 10 V/div
Input Coupling	DC, AC, Ground
Input Impedance	1 MΩ ‖ 15 pF
Max Input Voltage	300 V (CAT I)
Horizontal
Time Base Range	5 ns/div – 50 s/div
Time Base Accuracy	±50 ppm
Trigger & Decode
Trigger Types	Up to 15 types: Edge, Pulse, Video, Slope, Timeout, Runt, Nth Edge, Delay, Window, RS232/UART, I²C, SPI, and more
Serial Decode (Standard)	RS232/UART, I²C, SPI
Parallel Decoding	Standard included
Display
Screen Size	7.0 inch (17.8 cm) WVGA TFT LCD
Resolution	800 × 480 pixels
Display Technology	Intensity-graded color (UltraVision)
Measurement & Math
Auto Measurements	37 waveform parameters with statistics
Math Functions	Add, Subtract, Multiply, Divide, FFT, AND, OR, XOR, NOT
Pass/Fail Testing	Included standard
Connectivity & I/O
Interfaces	USB Host, USB Device, LAN (LXI Core 2011), AUX output
PC Software	RIGOL UltraSigma (remote control & data capture)
Expandability	Upgradable to MSO via RPL1116 digital probe kit
Physical
Dimensions	313 mm × 160 mm × 121 mm (W×H×D)
Platform / Series	RIGOL DS1000Z-E
Box Contents
In the Box	DS1102Z-E unit × 1, Passive probes × 2, Power cord × 1, USB cable × 1, Quick-start guide × 1
Availability in BD	In stock at Astz BD — ships to all 64 districts

 

Key Features 100 MHz digital oscilloscope Bangladesh

1. 100 MHz analog bandwidth across both channels simultaneously
2. 1 GSa/s real-time sample rate for accurate capture of fast signal transitions
3. 24 Mpts deep memory (single-channel) / 12 Mpts (dual-channel) — standard, no paid upgrade needed
4. RIGOL UltraVision technology: intensity-graded color display reveals signal density
5. 30,000 wfms/s waveform capture rate catches rare and intermittent glitches
6. Hardware waveform recording and playback — up to 60,000 frames stored
7. 7-inch WVGA (800×480) TFT LCD with wide viewing angle and vivid color
8. Up to 15 trigger types: Edge, Pulse, Video, Slope, Timeout, Runt, Nth Edge, Delay, Window, RS232, I²C, SPI and more
9. Built-in serial decode for RS232/UART, I²C, and SPI — no extra licence fee
10. 37 auto-measurement parameters with statistical display
11. Built-in FFT math function for frequency-domain analysis
12. Pass/Fail mask testing for production-line and quality assurance applications
13. Vertical range: 1 mV/div to 10 V/div — ultra-low noise floor
14. Standard interfaces: USB Host, USB Device, LAN (LXI Core 2011), AUX output
15. Upgradable to Mixed Signal Oscilloscope via RPL1116 digital probe kit

Who Uses This Rigol DS1000Z-E series scope,

1. Embedded systems engineers debugging microcontroller and FPGA circuits
2. Electronics and electrical engineering students at university and polytechnic level
3. Analog and digital circuit designers in R&D departments
4. Power electronics engineers measuring switching waveforms in converters and inverters
5. Telecommunications engineers testing signal integrity on communication boards
6. Biomedical equipment technicians servicing and calibrating medical devices
7. Physics and electronics laboratory demonstrators at educational institutions
8. Freelance electronics repair technicians working on consumer and industrial equipment
9. Automation and robotics engineers validating sensor and actuator control signals

Applications 2 channel oscilloscope price Bangladesh

1. Embedded system firmware debugging — observe UART, I²C, and SPI bus traffic live
2. Power supply design — measure switching noise, ripple, and transient response
3. Analog circuit design and characterization — amplifiers, filters, oscillators
4. Motor drive and inverter waveform analysis in industrial automation
5. Signal integrity testing on high-speed PCB traces
6. Audio amplifier distortion and frequency response measurements via FFT
7. Production-line quality testing with Pass/Fail mask comparison
8. Education labs — oscilloscope fundamentals, waveform capture, and protocol analysis
9. Aerospace and defence prototype validation (field-portable due to compact size)
10. Biomedical device testing — ECG signal monitoring and biopotential waveform capture

Frequently Asked Questions (FAQ) 100 MHz digital oscilloscope Bangladesh

What bandwidth does the Rigol DS1102Z-E oscilloscope provide?

The DS1102Z-E provides a 100 MHz analog bandwidth on both channels simultaneously. Engineers working with signals up to 100 MHz capture them accurately without aliasing or bandwidth roll-off distortion.

Does the DS1102Z-E include serial decode for UART, I²C, and SPI?

Yes. RIGOL includes RS232/UART, I²C, and SPI serial decode as standard features — no additional licence or add-on purchase required. The scope displays decoded data directly on-screen alongside the analog waveform.

What makes UltraVision technology useful on the DS1102Z-E?

UltraVision combines intensity-graded color rendering with a 30,000 wfm/s capture rate. The display uses brighter colors to show frequently occurring signal states and darker shades for rare events, so users spot intermittent faults and glitches far more easily than on a conventional monochrome scope.

How deep is the waveform memory on the DS1102Z-E?

The DS1102Z-E offers 24 Mpts of memory in single-channel mode and 12 Mpts per channel in dual-channel mode — both as standard. Deep memory lets the scope maintain a high sample rate over a longer time window, so users capture subtle signal details across entire event sequences.

Can users upgrade the DS1102Z-E to a Mixed Signal Oscilloscope?

Yes. RIGOL designed the DS1000Z-E platform to support the RPL1116 digital probe kit. Buyers who purchase that kit at a later stage upgrade the DS1102Z-E to a full Mixed Signal Oscilloscope that measures both analog and digital signals simultaneously. Rigol DS1102Z-E oscilloscope,

How does a user connect the DS1102Z-E to a PC for data export?

The oscilloscope connects to any PC via its USB Device port using the supplied USB cable. RIGOL’s free UltraSigma software handles remote control, waveform data export, and screen capture. The LAN port also supports remote operation over a network using the LXI Core 2011 protocol.

Does Astz BD ship the Rigol DS1102Z-E outside Dhaka?

Yes. Astz BD ships the DS1102Z-E to all 64 districts of Bangladesh through trusted courier partners. Buyers outside Dhaka typically receive delivery within 2–4 working days.

 

Why Buy from Astz BD 100 MHz digital oscilloscope Bangladesh

Astz BD imports the Rigol DS1102Z-E oscilloscope as an original sealed unit and delivers it to electronics engineers, university departments, and workshop owners across all 64 districts of Bangladesh at a transparent, competitive price. Rigol DS1102Z-E oscilloscope,

1. Original RIGOL product — authentic serial number, no grey-market or counterfeit risk
2. Pre-dispatch power-on check confirms the display, channels, and USB interface all function correctly
3. Fast nationwide delivery — Dhaka, Chittagong, Sylhet, Rajshahi, Khulna, Barishal and all districts
4. Multiple payment options: bKash, Nagad, Rocket, bank transfer, and cash on delivery
5. Institutional purchase support — Astz BD assists universities and companies with invoice and procurement documentation
6. Bulk order discounts for engineering departments and resellers
7. Secure double-layer packaging prevents corner and screen damage during courier transit
8. After-sales technical support — Astz BD helps buyers with basic setup and interface questions